Description of product
Properties GST2:
Universal GSM module offers a wide application in remote control of buildings.
The main features of the module GST2 are 2 inputs and 2 outputs, which can be assigned different functions.
All functions can be set through an easy software GST2-SW, which is included.
GST2 module allows you to set the following functions:
-
Automatically sends an SMS with information about the state (switching on or off) the input contact
-
Rings up to two phone numbers when changing the state of input contact
-
Automatically sends SMS when temperature thresholds are exceeded the measured input
-
Rings on one telephone number for exceeding temperature limits
-
Automatically switch output when change on input
-
Automatically switch output when on input are exceeded temperature limits
-
Regulates the hysteresis of 1 ° C
-
Output is controled in according to the desired temperature on input
-
Output is switch on by the pre-set time. Output is activated by SMS.
-
Output is time-controlled. The output is activated by SMS message with setting time of directly in the SMS message (from 1 minute to 999 minutes = 16 hours 33 minutes)
-
Output is controled by ringing on the set time t1
-
Automatically controls both outputs ringing with adjustable delay
-
Allows connection and control of thermostats and central units of our company
-
Automatically sends an SMS when a power failure (only when using UPS).
Where to use the module GST2 in practice??
-
connection to existing alarm
-
guarding the door is opened
-
connection to the fire detector
-
monitoring minimum and maximum temperatures (eg in the building, greenhouse ...)
-
control gates, barriers
-
switching heating, air conditioning, lighting, swimming pool filtration, pumps, irrigation.