Continuous increase in light intensity is achieved by a long press of the upper part of the fingerboard. Moving away the hand stops the change of brightness and its current value remains ready for further activation. To decrease intensity use the lower part of the fingerboard. Of benefit is optional assembly with the VENUS design switch.
PLUG-IN INSTALLATION SYSTEM:
Fast and clear installation, the regulator is divided into a power section and microprocessor main section, which is connected by a mere sliding in of the connecting clamps. Feed conductors are connected to the power section clamps and fastened to the installation box, then just slide the main section onto the power section and the installation is complete.
Power supply | 230 V / 50 Hz |
---|---|
Resistive load | 2 W to 100 W |
Switching element | polovodič |
Max. cross-wire installation | 2, 5 mm2 |
Fuse | Yes (F 2 A/ 1500 A, 250 V) |
Protection | IP20 |
Working temperature | 0 °C to 40 °C |
Function | |
Touch control | Yes |
IR control by remote controller | No |
System of learning of IR codes | No |
LED light indication | Yes |
Sound indication | Yes |
Possible control from more places | No |
Memory of the last set intensity | Yes |
Smooth start of lighting | Yes |
Automatic shut off after 8 hours | No |
Simulation of Presence of persons | No |
Use for transformers | No |
Suitable for LED | Yes (stmívatelné) |
Suitable for energy-saving lamps | Yes (stmívatelné) |
Immune to interference | Yes |
Silent operation | Yes |
Firma ELEKTROBOCK MTF s.r.o. je řádně zapsána v Seznamu výrobců elektrozařízení na Ministerstvu životního prostředí a splňuje veškeré povinnosti zákona o odpadech.
© 2025 ELEKTROBOCK MTF s.r.o. | Internetový obchod dodává Via Aurea s.r.o.